面向人机交互的运动想象脑电信号感知算法研究

脑电信号的特征提取与分类识别是脑机交互领域的核心问题。针对运动想象脑电信号的多分类问题,以更好利用包含有用信息的脑电信号频带为目的,提出了基于小波包变换(WPD)和一对多共空间模式(CSP)的特征提取算法。首先使用WPD算法将原始脑电信号分解成一系列子频带,筛选与运动想象活动相关的子频带。然后使用一对多CSP算法进行特征提取。最后对各子频带的特征进行组合并使用BP神经网络进行分类。算法的有效性通过BCI竞赛的基准数据集进行了测试,相交于竞赛结果有了明显提升。     

Moving horizon based wavelet de-noising method of dual-observed geomagnetic signal for nonlinear high spin projectile roll positioning

Phase-frequency characteristics of approximate sinusoidal geomagnetic signals can be used for projectile roll positioning and other high-precision trajectory correction applications. The sinusoidal geomagnetic signal deforms in the exposed and magnetically contaminated environment. In order to preciously recognize the roll information and effectively separate the noise component from the original geomagnetic sequence, based on the error source analysis, we propose a moving horizon based wavelet de-noising method for the dual-observed geomagnetic signal filtering where the captured rough roll frequency value provides reasonable wavelet decomposition and reconstruction level selection basis for sampled sequence; a moving horizon window guarantees real-time performance and non-cumulative calculation amount. The complete geomagnetic data in full ballistic range and three intercepted paragraphs are used for performance assessment. The positioning performance of the moving horizon wavelet de-noising method is compared with the band-pass filter. The results show that both noise reduction techniques improve the positioning accuracy while the wavelet de-noising method is always better than the band-pass filter. These results suggest that the proposed moving horizon based wavelet de-noising method of the dual-observed geomagnetic signal is more applicable for various launch conditions with better positioning performance.     

红外成像自动目标识别技术研究--计算模型与数据流程

红外自动目标识别是当前智能化图像处理及应用开发的前沿关键技术,其研究进展与计算机视觉的发展水平紧密相关。人类视觉系统是计算机视觉的原始模型,其视觉感知机理的研究将有助于揭示视觉表象的本质,进而为准确描述图像特征信息提供科学而可靠的依据。主要从视觉感知模型、感知功能模块响应特性、视觉对比灵敏度等方面对视觉感知基本原理加以综合分析,并力图利用这些功能卓越的信息处理机制阐明一种具有普适性的视觉计算模型———目标-背景表征模型。在此基础上,将背景区域感知与目标特征分析相结合,提出了自适应信号检测、目标特征识别和运动轨迹跟踪的层次化数据处理流程,从而为红外自动目标识别技术提供一条新的探索途径。     

自动控制系统故障诊断技术的发展与展望

通过将自动控制系统的故障诊断分为基于数学模型的方法、基于信号处理的方法和基于知识的方法三大类进行讨论,得出了故障诊断技术的发展概况与发展趋势。进一步给出了故障诊断技术典型新应用,并指出了故障诊断技术中存在的问题和未来的研究重点。     

基于不同能量值特征优选的水声目标识别

采用Bartlet平均周期图、小波变换和经验模态分解方法分别提取信号的频段能量值特征、IMF能量值特征，重点对IMF能量值特征进行特征优选。通过设计BP神经网络分类器，对实测的四类舰船目标的辐射噪声信号进行测试，取得了较好的识别效果。     

基于门限的无线传感器网络密钥管理方案

由于无线传感器网络在能量消耗、内存开销和计算能力等方面的局限性，传统的网络密钥管理方法已不适用。为此提出了一种适用于无线传感器网络的密钥预分配方法——基于（t，n）-门限方案，给出了密钥分配方法，并从方案的连通性、安全性等方面进行了有效的分析，结果表明该算法在这些方面有一定的优势。     

Dynamic signatures and their use in comparing the reliability of new and used systems

The signature of a system with independent and identically distributed (i.i.d.) component lifetimes is a vector whose ith element is the probability that the ith component failure is fatal to the system. System signatures have been found to be quite useful tools in the study and comparison of engineered systems. In this article, the theory of system signatures is extended to versions of signatures applicable in dynamic reliability settings. It is shown that, when a working used system is inspected at time t and it is noted that precisely k failures have occurred, the vector s [0,1]^n‐k whose jth element is the probability that the (k + j)th component failure is fatal to the system, for j = 1,2,2026;,n ‐ k, is a distribution‐free measure of the design of the residual system. Next, known representation and preservation theorems for system signatures are generalized to dynamic versions. Two additional applications of dynamic signatures are studied in detail. The well‐known “new better than used” (NBU) property of aging systems is extended to a uniform (UNBU) version, which compares systems when new and when used, conditional on the known number of failures. Sufficient conditions are given for a system to have the UNBU property. The application of dynamic signatures to the engineering practice of “burn‐in” is also treated. Specifically, we consider the comparison of new systems with working used systems burned‐in to a given ordered component failure time. In a reliability economics framework, we illustrate how one might compare a new system to one successfully burned‐in to the kth component failure, and we identify circumstances in which burn‐in is inferior (or is superior) to the fielding of a new system. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

基于改进支持向量机的航空装备维修安全评估

传统航空装备维修安全评估大多采用定性评估方法,针对传统评估中存在主观性、随意性过强,实践中缺乏可操作性等问题,提出了基于核密度估计的改进支持向量机。构建了航空装备维修安全评估指标体系,在利用层次分析法对其权重进行计算的基础上,通过改进支持向量机对某单位航空装备维修状况进行了全面评估,为航空装备维修安全评估提供了科学的方法,对确保航空装备维修安全具有较强的理论和现实意义。     

无人机保距跟踪中的视觉跟踪算法研究

针对固定翼无人机对地面目标进行保距跟踪过程中不能稳定获取目标图像的问题,设计了一种提高视觉目标跟踪稳定性的算法。该算法基于核相关滤波算法,提出了线性旋转子空间的概念,用于估计平面外旋转后的目标图像,在跟踪的过程中通过跟踪效果判断是否对线性旋转子空间进行校正。这种更新机制提高了在相对位置不断变化的情况下视觉跟踪的稳定性和准确性,有效地降低了跟踪漂移的程度。算法在无人机跟踪视角的视觉跟踪数据集中进行了测试,结果显示在跟踪的准确性和鲁棒性上明显好于当前主流跟踪算法。并使用固定翼无人机进行了实机飞行,验证了算法的可行性。     

型号研制与产品数据管理

介绍了产品数据管理(PDM)的概念和基本功能,结合当前型号研制的特点和计算机信息技术应用的状况、发展,研究了型号研制产品数据管理的需求、功能及实施,为当前型号研制依靠CIMS技术实现产品数据管理提出了8条基本原则。